Flange attenuator, also known as adapter attenuator, has the same shape as ordinary adapter. Its principle is that the adapter is equipped with attenuator sheets so that the connectors can not contact each other completely to achieve the purpose of attenuation. Flange attenuator is suitable for attenuation connection between jumpers in optical fiber links. Flange attenuator is only suitable for PC type connectors with insertion end face, and is suitable for the wavelength range of 1250-1650 nm.
- Optical Fiber Communication System, High Speed and Large Capacity Optical Fiber Transmission System
- Local Area Network (LAN), Wide Area Network (WAN), FTTX, Optical Fiber CATV Network
- Communication room, data center, optical fiber connection transmission equipment, national defense readiness, etc.
- Dense Wavelength Division Multiplexing (DWDM) System, Optical Division Multiplexer (OADM)
| Projects | Specification parameters |
| Flange attenuator type | SC、LC、FC、ST、FC-ST、SC-ST、SC-FC (Suitable for PC Connector) |
| Test wavelength | 1310nm, 1550nm |
| Working bandwidth range | 1250~1650nm |
| Typical attenuation value | 3、5、7、10、15、20dB |
| Attenuation tolerance | ±10% |
| Repeatability | ≤0.10dB |
| Interchangeability | ≤0.20dB |
| Plugging performance | Insertion 1000 times, loss change≤0.20dB |
| Working temperature | -20℃ to +70℃ |
| Storage temperature | -40℃ to +85℃ |
